RGS-PR9000 Series - Comunicaciones Industriales

RGS-PR9000 is Layer-3 modular managed redundant ring Ethernet switch with 4 slots. The switch is designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 to 85°C (If use 10G SFP module then operating temperature is -20 ~ 60°C). RGS-PR9000 can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation and rolling stock application.

Physical Ports
ŒŒ - Slot Number 4 (up to 3 slots for 8x1G ports and 1 slot for 4x10G port)

ŒŒ Technology
- Ethernet Standards: IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.z for 1000Base-X, IEEE 802.3ae for 10Gigabit Ethernet, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol ), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
- MAC Table 8K
- Priority Queues: 8
- Processing Store-and-Forward
- Switch Properties: Switching latency: 7 us, Switching bandwidth: 128Gbps, Max. Number of Available VLANs: 256, IGMP multicast groups: 128 for each VLAN, Port rate limiting: User Define
- Jumbo frame: Up to 9.6K Bytes
- Security Features: Device Binding security feature, Enable/disable ports, MAC based port security, Port based network access control (802.1x), Single 802.1x and Multiple 802.1x, MAC-based authentication, QoS assignment, Guest VLAN, MAC address limit, TACACS+, VLAN (802.1Q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security, Https / SSH enhance network security, Web and CLI authentication and authorization, Authorization (15 levels) IP source guard
Software Features
- Hardware routing, RIP and static routing
- IEEE 1588v2 clock synchronization
- IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
- Multiple Registration Protocol (MRP)
- MSTP (RSTP/STP compatible)
- Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
- TOS/Diffserv supported
- Quality of Service (802.1p) for real-time traffic
- VLAN (802.1Q) with VLAN tagging
- IGMP v2/v3 Snooping
- IP-based bandwidth management
- Application-based QoS management
- DOS/DDOS auto prevention
- Port configuration, status, statistics, monitoring, security
- DHCP Server/Client
- DHCP Relay
- Modbus TCP
- DNS client proxy
- SMTP Client

-Network Redundancy: O-Ring Open-Ring, O-Chain, MRP, MSTP(RSTP/STP compatible)
LED Indicators
- Power Indicator (PWR) Green : Indicates that the system ready. The LED is blinking when the system is upgrading firmware
- Power Indicator (PWR1 / PWR2) Green : Power LED x 2
- Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
- O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode
- Green Blinking : Indicates that the Ring is broken.
- Fault Indicator (Fault) Amber : Indicate unexpected event occurred
- Reset To Default Running Indicator (DEF) Green : System resets to default configuration
- Supervisor Login Indicator (RMT) Green : System is accessed remotely
- Smart LED Display system
- Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4
- Mode select Button (MODE) : Link/Act(LK/ACT) / Speed(

Fault Contact
- Relay Relay output to carry capacity of 1A at 24VDC

Power
- Redundant power input modular Dual 24/48VDC (20~72VDC) power inputs at terminal block Dual 88~264VAC / 100~370VDC power inputs at terminal block
- Power Consumption (Typ.) 46Watts max. 43.5Watts max.
- Overload Current Protection Present

Physical Characteristics
- Enclosure 19-inch rack-mountable
- Dimensions (W x D x H) 440 (W) x 325 (D) x 44 (H) mm (17.32x12.8x1.73 inches)
- Weight (g) 6450 g

Environmental
- Storage Temperature -40 to 85°C (-40 to 185°F )
- Operating Temperature 10G SFP+ module absent : -40 to 85°C (-40 to 185°F )
- 10G SFP+ module used: -20 to 60 °C (-4 to 140°F )
- Operating Humidity 5% to 95% Non-condensing

Regulatory Approvals
- Power Automation IEC 61850-3, IEEE 1613
- EMI: FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
- EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Warranty 5 years

Available Model
- RGS-PR9000-LV Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots, low-voltage power input
- RGS-PR9000-HV_US Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots, high-voltage power input, US power cord
- RGS-PR9000-HV_EU Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots, high-voltage power input, EU power cord