Productos


Noticias

RMC-111FB Series / RMC-111PB - Comunicaciones Industriales

Industrial rack-mount card type Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX
Key Features
ŒŒ

RMC-111 series are industrial rack-mount card type Ethernet to fiber media converters for the rack-mount chassis box of RMC-1000, as these card type converters are hot-swappable and can be easily installed on RMC-1000. RMC-111 series are the cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, allowing you to extend communication distance by optical fiber. RMC-111 series support MDI/MDIX auto detection, so you don’t need to use crossover wires. RMC-111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets and waits for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then RMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a sign to react to the situation. Therefore, the RMC-111 series, with RMC-1000 as their host, are reliable media converters that can satisfy most demands of operating environments.

Physical Ports
ŒŒ - 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX: 1
- 100/1000Base-FX SFP port: 1

ŒŒ Technology
- Ethernet Standards: IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3x for Flow control
- Processing Store-and-Forward
- DIP-Switch setting: DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable, DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate, DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate, DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex

LED Indicators
ŒŒ - Power / Indicator Green : Power LED x 1
- 10/100Base-T(X) RJ45 port indicator
- Green for port Link/Act
- Amber for 100Mbps indicator
- Green for port duplex indicator
- 100Base-FX fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Blinking) Acting / (OFF) Link down
- Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
- LFP statue indicator Amber for link fault detected and passed

Power
- Power consumption (Typ.) 2.2 Watts
- Reverse Polarity Protection Present

Physical Characteristics
-ŒŒ Dimensions (W x D x H) 21.8 (W) x 73.1 (D) x 126 (H) mm
- Weight (g) 145 g and 140 g

Environmental
-ŒŒ Storage Temperature -40 to 85°C(-40 to 185°F)
- Operating Temperature -10 to 60°C (14 to 140°F)
- Operating Humidity 5% to 95% Non-condensing

Regulatory Approvals
-ŒŒ EMI FCC Part 15, CISPR (EN55022) class A
- EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock IEC60068-2-27
- Free Fall IEC60068-2-32 - Vibration IEC60068-2-6
- Warranty 2 years

Available Model
- RMC-111FB-MM-SC Industrial Rack-mount card type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, 2km/1310nm, SC connector
- RMC-111FB-SS-SC ndustrial Rack-mount card type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, single-mode, 30km/1310nm, SC connector
- RMC-111PB Industrial Rack-mount card type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket