Productos


Noticias

IDS-141A/181A - Comunicaciones Industriales

Industrial 4-port/8-port slim type serial to Ethernet device server
Key Features
ŒŒ

IDS-181A/141A is an innovative secure 8-port/4-port RS-232 to 1-port LAN serial to Ethernet device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP, Ethernet modem. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, and DDNS make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-181A/141A can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-181A/141A features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission. IDS-181A/141A provides dual redundant power inputs, 12~48VDC on terminal block and DC power jack to guarantee a non-stop operation. With wide operating temperature, -40~70°C, and rugged IP-30 housing design, IDS-181A/141A could operate in the harsh industrial environment. Therefore IDS- 181A/141A is the best solution to the high demand of secure serial to Ethernet critical data communication.

Physical Ports
ŒŒ - 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX: 1

ŒŒ Serial Ports
- RS-232 Serial port number 8 y 4
- Connector DB62 Female (provide DB62 to 8 ports DB9 cable) DB62 Female (provide DB62 to 4 ports DB9 cable)
- Operation Mode RS-232
- Serial Baud Rate 110 bps to 115.2 Kbps
- Data Bits 7, 8
- Parity odd, even, none, mark, space
- Stop Bits 1, 1.5, 2
- RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Flow Control XON/XOFF, RTS/CTS, DTR/DSR

Network Features
ŒŒ - Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS

LED Indicators
- Power Indicator PWR 1(2) / Ready : Green On : Power is on and functioning Normally and Green Blinking : Located by Administrator.
- 10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for port Link/Act at 100Mbps.
- Serial TX / RX LEDs Red : Serial port is receiving data Green : Serial port is transmitting data

Fault Contact
- Relay Relay output to carry capacity of 1A at 24VDC

Power
-ŒŒ Redundant Input Power Triple DC inputs. 12~48VDC on 6-pin terminal block and power jack
- Power Consumption (Typ.) 4.5 Watts and 3.7 Watts
- Overload Current Protection Present
- Reverse Polarity Protection Present on terminal block

Physical Characteristics
-ŒŒ Enclosure IP-30
- Dimensions (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm
- Weight (g) 358 g 355 g

Environmental
-ŒŒ Enclosure IP-30
- Dimensions (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm
- Weight (g) 358 g 355 g

Physical Characteristics
-ŒŒ Storage Temperature -40 to 85°C (-40 to 185°F)
- Operating Temperature -40 to 70°C (-40 to 158°F)
- Operating Humidity 5% to 95% Non-condensing

Regulatory Approvals
-ŒŒ EMI FCC Part 15, CISPR (EN55022) class A
- EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock IEC60068-2-27
- Free Fall IEC60068-2-32
- Vibration IEC60068-2-6
- Safety EN60950-1
- MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 73,914 76,637
- Warranty 5 years

Available Model
- IDS-181A-US Industrial 8-port slim type secure serial to Ethernet device server with 8xRS-232 and 1x10/100Base-T(X), DB62 connector, US adapter
- IDS-181A-EU Industrial 8-port slim type secure serial to Ethernet device server with 8xRS-232 and 1x10/100Base-T(X), DB62 connector, EU adapter
- IDS-141A-US Industrial 4-port slim type secure serial to Ethernet device server with 4xRS-232 and 1x10/100Base-T(X), DB62 connector, US adapter
- IDS-141A-EU Industrial 4-port slim type secure serial to Ethernet device server with 4xRS-232 and 1x10/100Base-T(X), DB62 connector, EU adapter