Productos


Noticias

IDS-5012 - Comunicaciones Industriales

Industrial 1-port secure serial to Ethernet device server with 1xRS-232/422/485 and 2x10/100Base-T(X)
Key Features
ŒŒ

IDS-5012 is an innovative secure 1-port RS-232/422/485 to 2 port LAN serial to Ethernet device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5012 can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5012 features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.

IDS-5012 supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on DC power jack and terminal block to guarantee a nonstop operation. With wide operating temperature, -40~70°C, and rugged IP-30 housing design, IDS-5012 could operate in the harsh industrial environment. Therefore, IDS-5012 is the best solution to the high demand of secure serial to Ethernet critical data communication.

Physical Ports
ŒŒ - 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2

ŒŒ Serial Ports
- Connector DB9(male) x 1
- Operation Mode RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool
- Serial Baud Rate 110 bps to 460.8 Kbps
- Data Bits 5, 6, 7, 8
- Parity odd, even, none, mark, space
- Stop Bits 1, 1.5, 2
- RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- RS-422 Tx+,Tx-, Rx+, Rx-,GND
- RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND
- RS-485 (2-wire) Data+, Data-,GND
- Flow Control XON/XOFF, RTS/CTS, DTR/DSR

Network Features
- Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, PPPoE, DDNS

LED Indicators
- Power Indicator, PWR 1(2) / Ready : Red On : Power is on and booting up. Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly. Green On : Power is on and functioning Normally. Green Blinking : Located by Administrator.
- 10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps. Serial TX / RX LEDs Red : Serial port is receiving data Green : Serial port is transmitting data

Power
- Redundant Input Power Dual DC inputs. 12~48VDC on 3-pin terminal block and power jack
- Power Consumption (Typ.) 4 watts
- Overload Current Protection Present
- Reverse Polarity Protection Present on terminal block

Physical Characteristics
-ŒŒ Enclosure IP-30
- Dimensions (W x D x H) 72(W)x29.4(D)x123.4(H) mm (2.83x1.16x4.86 inch.)
- Weight (g) 327

Environmental
-ŒŒ Storage Temperature -40 to 85°C (-40 to 185°F)
- Operating Temperature -40 to 70°C (-40 to 158°F)
- Operating Humidity 5% to 95% Non-condensing

Regulatory Approvals
-ŒŒ EMI FCC Part 15, CISPR (EN55022) class A EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock IEC60068-2-27
- Free Fall IEC60068-2-32
- Vibration IEC60068-2-6
- Safety EN60950-1
- Warranty 5 years

Available Model
- IDS-5012 Industrial 1-port secure serial to Ethernet device server with 1xRS-232/422/485 and 2x10/100Base-T(X)