IMC-111FB / IMC-111PB - Comunicaciones Industriales

IMC-111 series are the cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, as they allow you to extend communication distance by optical fiber. IMC-111 series support MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-111 series have wide operating temperature range from -40 ~ 70°C and have dual power inputs, each accepting a wide voltage range from 12 ~ 48 VDC. Hence IMC-111 series are suitable for harsh operating environments.

IMC-111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets and waits for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore the IMC-111 series are reliable media converters that can satisfy most demand of different operating environments.

Physical Ports
ŒŒ - 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX: 1
- 100Base-FX SFP port: 1

ŒŒ Technology
- Ethernet Standards: IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3x for Flow control
- Processing Store-and-Forward
- DIP-Switch setting: DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable, DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate, DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate, DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex

LED Indicators
ŒŒ - Power Indicator Green : Power LED x 2, 10/100Base-T(X) RJ45 Port Indicator, Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down, Amber for 100Mbps/10Mbps indicator – (ON) Link at 100Mbps / (OFF) Link at 10Mbps, Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
- 100Base-FX Fiber Port Indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
- Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
- LFP status indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable

Power
- Input Power Dual 12~48 VDC power input at 4-pin terminal block
- Power Consumption (Typ.) 2.2 Watts
- Overload Current Protection Present
- Reverse Polarity Protection Present on terminal block

Physical Characteristics
-ŒŒ Enclosure IP-30
- Dimensions (W x D x H) 26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
- Weight (g) 218g

Environmental
-ŒŒ Storage Temperature -40 to 85°C (-40 to 185°F)
- Operating Temperature -40 to 70°C (-40 to 158°F)
- Operating Humidity 5% to 95% Non-condensing

Regulatory Approvals
-ŒŒ EMI FCC Part 15, CISPR (EN55022) class A
- EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock IEC60068-2-27
- Free Fall IEC60068-2-32
- Vibration IEC60068-2-6
- Safety EN60950-1
- Warranty 5 years

Available Model
- IMC-111FB-MM-SC Industrial mini type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, 2km/1310nm, SC connector
- IMC-111FB-SS-SC Industrial min type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, single-mode, 30km/1310nm, SC connector
- IMC-111PB Industrial mini type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket