PEAK 876VL2 - Computo Industrial

PEAK 876VL2 is PICMG 1.3 full-size Single Board Computer (SBC), which supports Intel® Core™ i5/i3/Pentium® processors with Hyper-Threading technology. The Intel® Core™ i5/i3/Pentium® supports dual channel non-ECC DDR3 1066/ 1333 MHz memory in two DIMM slots and a Core™ i5/i3/ Pentium® integrated graphics controller. The Q57 Express Chipset PCH manages SATA HDD ports, parallel port. Furthermore, it supports other versatile I/O ports such as two serial ports, eight USB ports, and two PCI Express Gigabit LAN ports. The PEAK 876VL2, with Intel® Core™ i5/ i3/ Pentium® and PCI Express LAN, offers a great solution for advanced industrial application that requires superb display and processing performance.

CPU Support
-ŒŒ Intel® LGA1156, Core™ i5/ i3/ Pentium®

Main Memory
-ŒŒ 2 x 240-pin DIMM, for up to 8GB dual channel Non-ECC DDR3 1066/1333

Chipset
ŒŒ Intel® Q57 Express Chipset PCH BIOS
-ŒŒ AMI BIOS
-ŒŒ Plug & Play support
-ŒŒ Advanced Power Management and Advanced Configuration & Power Interface support

On-board LAN
-ŒŒ 1 x Intel® 82578DM PHY for AMT 6.0
-ŒŒ 1 x Intel® 82574L PCI Express Gigabit Ethernet
-ŒŒ Support boot from LAN (PXE)
-ŒŒ 2 x RJ45 with LED

Display
-ŒŒ Intel® Core™ i5/ i3/ Pentium® processors Integrated graphics
-ŒŒ Analog display support up to 2048x1536 @ 75Hz for CRT

I/O Interfaces
-ŒŒ USB 2.0: 8 ports (2 on board, 4 to backplane), 2 ports through I/O Bracket
-ŒŒ Serial port: 2 port, with 2x5pin headers (COM 1 and COM 2)
-ŒŒ SATA HDD: 6 ports, Support RAID 0/1/5/10 and Intel® Matrix Storage
-ŒŒ Parallel port: 1 x 26-pin connector
-ŒŒ IrDA: 1 x 5-pin header
-ŒŒ GPIO: Supports 4 sets general purpose I/O each with TTL level (5 V) interface
-ŒŒ On-board buzzer x 1
-ŒŒ Power LED/Power On/Reset/SMBUS: 2 x 8 pin header
-ŒŒ 1 x 4-pin fan connector (for CPU); 1 x 3-pin fan connectors (for System)
-ŒŒ IPMB interface through PICMG 1.3 Golden-finger
-ŒŒ I/O On SBC Bracket
- 1 x VGA DB-15 connector
- 2 x RJ45 Gigabit Ethernet LAN port
- 2 x USB 2.0 Ports

Watchdog Timer
-ŒŒ 1-minute increments from 1 to 255 minutes
-ŒŒ 1-second increments from 1 to 255 seconds
-ŒŒ On-chip RTC with battery backup
-ŒŒ 1 x External Li-lon battery

System Monitor
-ŒŒ 6 Voltages (+3.3V, +5V, +12V, Vcore) memory, VTT
-ŒŒ 3 Temperatures (For CPU and System)
-ŒŒ 2 FAN speed monitors (1 for CPU and 2 for System FAN)

Dimensions
-ŒŒ PICMG 1.3 SHB
-ŒŒ Dimension: 338.58mm (L) x 126.39mm (W) (13.3’’ x 4.9")

Power Input
-ŒŒ Power source from backplane through golden finger and AUX +12V
-ŒŒ Support ATX/AT power supplies
-ŒŒ +12V/ +5V/ +3.3V/ +5Vsb

Environment
-ŒŒ Board level operating temperatures: 0°C to 60°C
-ŒŒ Storage temperature: -20°C to 85°C
-ŒŒ Relative humidity: 10% to 90%, (Non-condensing)

Certifications
-ŒŒ CE approval
-ŒŒ FCC Class A

Barebone
PEAK 876VL2 (P/N:10P0876VL00X0)
- PICMG 1.3 Full-Size SHB, Intel® LGA1156, Core™ i5/ i3/ Pentium® with Max 8GB, DDR3 DIMM, VGA